Custom Meta Tags

AVS NPI Hero (HB)

New Product Introductions

AVS NPI H1 (MT)

Avnet Silica new product introductions

Static HTML

NPI SEO Table

Reset
Image Product
NXP i.MX 8ULP
The i.MX 8ULP crossover applications processor family brings ultra-low power processing and advanced integrated security with EdgeLock® secure enclave to the intelligent edge. Optimizing energy at the chip level is becoming increasingly crucial for
Nordic Semiconductor nRF21540 DB
The nRF21540 DB is designed to be used by customers developing solutions with the nRF21540 RF FEM. The nRF21540 DB consists of an nRF21540 evaluation kit (EK) and an nRF21540 development kit (DK). The nRF21540 EK is a shield that can be used for radi
STMicroelectronics STEVAL-DPSTPFC1
The STEVAL-DPSTPFC1 3.6 kW bridgeless totem pole boost circuit achieves a digital power factor correction (PFC) with inrush current limiter (ICL). It helps you to design an innovative topology with the latest ST power kit devices: a silicon carbide M
NXP iMX RT1064
It is a 4-layer through-hole USB-powered PCB. At its heart lies the i.MX RT1064 crossover MCU, featuring NXP’s advanced implementation of the Arm® Cortex®-M7 core. This core operates at speeds up to 600 MHz to provide high CPU performance and excelle
Microchip SST26LF064RT 64-Mbit Radiation Tolerant
The SST26LF064RT is a Radiation Tolerant Serial Quad I/O™ (SQI™) flash device using 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26LF064RT also support ful
Microchip’s LAN9360 AVB Audio Endpoint
AVB endpoints components are Intelligent Ethernet Controllers that integrate AVB protocols and a set of additional features to enable engineers designing AVB capable products in no time and with almost no engineering resources needed. Endpoints are d
Microchip ATECC608B-TFLXTLS
The Microchip ATECC608B-TFLXTLS is the TrustFLEX secure element part of the Trust Platform for the CryptoAuthentication family. The device comes pre-configured implementing the most common authentication use cases use in the embedded industry by defa
Microchip's SW-TPDSv2
The Trust Platform Design Suite (TPDS) v2 is Microchip's dedicated software platform to onboard with embedded security. In addition to offer Secure Element and security solutions, Microchip also offer a full onboarding experience to start with embed
Nexperia 50 µA Zener diodes
Specified at a low test current Nexperia’s 50 µA Zener diodes are ideal for low bias and portable battery-powered applications. The diodes range is available in three different surface-mountable (SMD) package options, in an ultra-small Discretes Flat
Microchip Radiation Hardened Isolated DC-DC Converters
The SA series of DC-DC converters is available in both triple and single outputs. These devices are designed and qualified for the rigors of space including characterization for both Total Ionizing Dose (TID) and Single Event Effects (SEE). Operating
Renesas GreenPAK™ Family
The GreenPAK™  family delivers a vast array of semiconductor products such as MCU’s/SOC’s, analog & power to provide complete coverage for the broad signal chain in electronics systems. Renesas' customers win by tapping this rich portfolio.    GreenP
Insight SiP ISP2053 series - Dual-core Bluetooth 5.2 Modules
Based on nRF5340 Nordic Semiconductor wireless SoC with two Arm® Cortex®-M33 processors and advanced feature set, the ISP2053 module is ideally suited for LE Audio, professional lighting, advanced wearables, industrial, medical, and other complex IoT
Octavo OSDZU3 System-in-Package
The OSDZU3 is the fastest and most flexible way to develop a system around the Xilinx Zynq UltraScale+ MPSoC. It allows you to harness the performance of the ZU3 MPSoC, while removing the complexities without sacrificing flexibility. The OSZU3 integ
STMicroelectronics LDBL20
The LDBL20 high accuracy voltage regulator provides 200 mA of maximum current from an input voltage ranging from 1.5 V to 5.5 V, with a typical dropout voltage of 200 mV. It is available in the new STSTAMP™ package, allowing the maximum space saving.
STMicroelectronics STLQ020
The STLQ020 is a 200 mA low-dropout voltage regulator, able to work with an input voltage ranging from 2 V to 5.5 V. The typical dropout voltage at maximum load is 160 mV. The ultra-low quiescent current, which is just 0.3 μA at no load, extends bat
STMicroelectronics ST1PS03
The ST1PS03 is a nano-quiescent miniaturized synchronous step-down converter, which is able to provide up to 400 mA output current with an input voltage ranging from 1.8 V to 5.5 V. This converter is specifically designed for applications where high
STMicroelectronics ST1PS02
The ST1PS02 is a nano-quiescent miniaturized synchronous step-down converter, which is able to provide up to 400 mA output current with an input voltage ranging from 1.8 V to 5.5 V. This converter is specifically designed for applications where high
STMicroelectronics STEF05S
The STEF05S is an integrated electronic fuse optimized for monitoring the 5 V DC power lines. When connected in series to the main power rail, it is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condi
STMicroelectronics L7983
The L7983 device is a step-down monolithic switching regulator able to deliver up to 300 mA DC based on peak current mode architecture. The output voltage adjustability ranges from 0.85 V to VIN. The wide input voltage range and adjustable UVLO thres
STMicroelectronics STEF512SRX
The STEF512SRX is an integrated dual electronic fuse, designed to protect circuitry on the output from overcurrent and overvoltage events, in those applications requiring hot swap operation and inrush current control. The device embeds two electronic
STMicroelectronics STM6777
The STM6717/18/19/20 and STM6777/78/79/80 supervisors are a family of low-voltage/low-supply current processor (micro or DSP) supervisors, designed to monitor two (or three) system power supply voltages. They are targeted at applications such as set-
STMicroelectronics STM6522
The Smart Reset™ devices provide a useful feature that ensures that inadvertent short reset push-button closures do not cause system resets as the extended Smart Reset™ delay setup periods are implemented. Once the valid Smart Reset™ input levels and
STMicroelectronics STM6322
The STM6xxx supervisors are self-contained devices which provide microprocessor supervisory functions. A precision voltage reference and comparator monitors the VCCinput for an out-of-tolerance condition. When an invalid VCCcondition occurs, the rese
STMicroelectronics STC3117
The STC3117 includes the STMicroelectronics OptimGauge™ algorithm. It provides accurate battery state-of-charge (SOC) monitoring, tracks battery parameter changes with operation conditions, temperature, and aging, and allows the application to get a
STMicroelectronics L6362A
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it
STMicroelectronics L6360
The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut
STMicroelectronics STR485E
The STR485E is a low power differential line transceiver for data transmission standard RS485 applications in half-duplex mode. Data and enable signals are compatible with 1.8 V or 3.3 V supplies. Two speeds are selectable through SLR pin: fast data
STMicroelectronics L6364
The L6364 is a dual channel transceiver for industrial sensor applications. It has been designed to support the IO-Link standard and acts as a bridge between a microcontroller with a sensor or actuator function and a 24 V supply and signaling cable.
STMicroelectronics STM6600
The STM6600-01 devices monitor the state of connected push-button(s) as well as sufficient supply voltage. An enable output controls power for the application through the MOSFET transistor, DC-DC converter, regulator, etc. If the supply voltage is ab
STMicroelectronics TSB712
The TSB711, TSB711A, TSB712, TSB712A,TSB714 and TSB714A 6 MHz bandwidth amplifiers feature rail-to-rail input and output, which is guaranteed to operate from +2.7 V to +36 V single supply as well as from ±1.35 V to ±18 V dual supplies. These amplifie
Results Per Page: