| Image | Product |
|---|---|
|
STMicroelectronics ST732
The ST732 is 300 mA LDO regulator, designed to be used in several medium voltage applications. Ultra-low quiescent current of 5 µA makes it suitable for applications permanently connected to power supply/battery. This feature is also useful when ele |
|
STMicroelectronics LD59150
The LD59150 is a 1.5 A LDO regulator, designed to be used in several environments. Two versions, Industrial and AEC-Q100 are available. NMOS topology allows RDS(on) of the pass-element to be reduced, which results in a very small dropout voltage eve |
|
STMicroelectronics ST730
The ST730 is 300 mA LDO regulator, designed to be used in several medium voltage applications. Ultra-low quiescent current of 5 μA makes it suitable for applications permanently connected to power supply/battery. This feature is also useful when ele |
|
STMicroelectronics TSC2011H
The TSC2010H, TSC2011H and TSC2012H are precision bidirectional current sense amplifiers. They can sense the current thanks to a shunt resistor over a wide range of common mode voltages, from - 20 to + 70 V, whatever the supply voltage is. They are a |
|
STMicroelectronics LD49100
The LD49100 provides 1 A maximum current with an input voltage range from 1.5 V to 5.5 V and a typical dropout voltage of 200 mV. The device is stable with ceramic capacitors on the input and output. The ultra low-dropout voltage, low quiescent curre |
|
STMicroelectronics ST715
The ST715 is a high voltage, ultra low quiescent current and low drop linear regulator capable of providing an output current in excess of 85 mA. The device operates over an input voltage range from 2.5 V to 24 V, and it is stable with output ceramic |
|
Diodes Incorporated Gate Drivers
Diodes Incorporated offers a broad portfolio of non-isolated Gate Driver ICs covering a wide range of low voltage and high voltage applications. Designed for efficient and reliable drive of MOSFETs or IGBTs, these products are available as 3-phase, h |
|
STMicroelectronics STWD100
The STWD100 watchdog timer circuits are self-contained devices which prevent system failures that are caused by certain types of hardware errors (such as, non-responding peripherals and bus contention) or software errors (such as a bad code jump and |
|
STMicroelectronics L9963E
The L9963E is a Li-ion battery monitoring and protecting chip for high-reliability automotive applications and energy storage systems. Up to 14 stacked battery cells can be monitored to meet the requirements of 48 V and higher voltage systems. Each c |
|
STMicroelectronics ALED1262ZT
The ALED1262ZT is a monolithic 12 output LED driver designed for automotive exterior and interior lighting applications. The ALED1262ZT guarantees 19 V output driving capability allowing users to connect several LEDs in series. In the output stage, t |
|
STMicroelectronics ALED6000
The ALED6000 is a step down monolithic switching regulator designed to source up to 3 A DC current for high power LED driving. The wide input voltage range makes the ALED6000 the ideal choice for automotive systems. The 250 mV typical RSENSE voltage |
|
STMicroelectronics ALED7709
ALED7709x are automotive-grade (AEC-Q100 Grade1 qualified) LED drivers combining a boost/SEPIC controller and four low-side constant-current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supp |
|
STMicroelectronics LDK120
The LDK120 low drop voltage regulator provides 200 mA of maximum current from an input supply voltage in the range of 1.9 V to 5.5 V, with a typical dropout voltage of 100 mV. It is stabilized with a ceramic capacitor on the output. The very low dro |
|
STMicroelectronics A7987
The A7987 is a step-down monolithic switching regulator that can deliver up to 3 A DC. The adjustable output voltage ranges from 0.8 V to VIN. The wide input voltage range and the almost 100% duty cycle capability meet the fail-safe specifications fo |
|
STMicroelectronics A6986H
The A6986H automotive grade device is a step-down monolithic switching regulator able to deliver up to 2 A DC. The output voltage adjustability ranges from 0.85 V to VIN. The 100% duty cycle capability and the wide input voltage range meet the cold c |
|
Sandisk iNAND® IX EM122 Industrial
Sandisk iNAND IX EM122 EFDa Industrial embedded flash devices are designed and tested to withstand demanding environmental conditions, these industrial-grade flash devices feature advanced flash memory management firmware to provide enhanced power immu |
|
onsemi RSL15
RSL15 is an ultra−low power secure Arm® Cortex®−M33 processor−based Bluetooth Low Energy 5.2 wireless MCU designed for connected smart devices in industrial and medical applications. With built-in power management, a wide supply voltage range, flexib |
|
onsemi NCP1680 & NCP1681
The NCP1680 is a CRM PFC controller IC designed to drive the bridgeless totem-pole PFC topology. The bridgeless totem-pole PFC is a power factor correction architecture that consists of a fast switching leg driven at the PWM switching frequency and a |
|
onsemi NTBL045N065SC1
Silicon Carbide (SiC) MOSFET uses a completely new technology that provide superior switching performance and higher reliability compared to Silicon. In addition, the low ON resistance and compact chip size ensure low capacitance and gate charge. Con |
|
Renesas radiation hardened plastic switching regulators
The four devices include the ISL71001SLHM/SEHM point of load (POL) buck regulator, ISL71610SLHM and ISL71710SLHM digital isolators, and the ISL73033SLHM 100V GaN FET and integrated low-side driver. Combining rad-hard assurance levels with the board a |
|
Microchip Smart Embedded Vision
This enhanced software development tool enables customer options for designing secure and reliable systems in applications ranging from neural network inferencing to Industrial Internet of Things (IIoT) and factory automation, using Microchip’s Polar |
|
Octavo OSD32MP15x System-in-Package
The OSD32MP15x module is the first System in Package based on the STMicroelectronics STM32MP1. Delivering all the power of a full Microprocessor system in a package that feels like a Microcontroller, the OSD32MP15x has a footprint that is the same s |
|
Octavo OSD335x-SM System-in-Package
The OSD335x-SM is the smallest Texas Instruments AM335x module. It integrates the TI Sitara™ ARM® Cortex®-A8 AM335x processor, DDR3 memory, TPS65217C PMIC, TL5209 LDO, all the needed passives, and 4KB of EEPROM into a single BGA package. At 21mm X |
|
Quectel LTE-A EG12 series
The EG12 is a series of LTE-A Cat 12 modules in an LGA form factor measuring 39.5 mm x 37 mm x 2.8 mm, which meets the 3GPP Release 12 standard. The EG12 is compatible with Quectel’s Cat 6 and 18 modules EG06 and EG18, to enable ease of migration bet |
|
Quectel LTE-A EG060V-EA
The EG060V-EA is an LTE-A category 6 module in an LGA form factor measuring 37.0mm × 39.5mm × 3.05mm, which meets the 3GPP Release 10 standard. The EG060V-EA delivers maximum downlink rates of 300Mbps and uplink rates of 50Mbps under LTE, and multipl |
|
Microchip AgileSwitch® 2ASC-12A2HP
This new technology enables electric buses and other e-transportation power systems to meet and exceed stringent environmental conditions while maximizing efficiency. As demand for electric buses and other electrified heavy transport vehicles increas |
|
Quectel LTE-A EG06 series
The EG06 is a series of LTE-A Cat 6 IoT modules in an LGA form factor measuring 37.0 mm × 39.5 mm × 2.8 mm, which meets the 3GPP Release 11 standard. The EG06 delivers maximum downlink rates of 300Mbps and uplink rates of 50Mbps under LTE, and multip |
|
Quectel LTE EM05 series
The EM05 is a series of LTE Cat 4 IoT modules in a standard M.2 (NGFF) form factor measuring (42.0±0.15)mm × (30.0±0.15)mm × (2.3±0.20)mm, which meets the 3GPP Release 11 standard. The EM05 can provide data connectivity on LTE-FDD, LTE-TDD, DC-HSDPA, |
|
Quectel LTE EG95 series
The EG95 is a series of LTE Cat 4 IoT modules in an LGA package measuring 29.0mm × 25.0mm × 2.3mm, which meets the 3GPP Release 11 standard. The EG95 is pin-to-pin compatible with Quectel’s UMTS/HSPA+ UG95 and UG96 modules, and LPWA BG95 and BG96 mod |
|
onsemi M3S 1200V Silicon Carbide (SiC) MOSFETs
The new family of 1200V M3S planar SiC MOSFETs is optimized for fast switching applications. Planar technology works reliably with negative gate voltage drive and turn off spikes on the gate. This family has optimum performance when driven with 18V g |