| Image | Product |
|---|---|
|
STMicroelectronics ST1VAFE6AX
The ST1VAFE6AX is a biosensor embedding a vAFE channel to detect biopotential signals and a 6-axis IMU featuring a high-performance 3-axis digital accelerometer and 3-axis digital gyroscope for motion tracking. The ST1VAFE6AX embeds advanced dedicat |
|
Power your applications with Nexperia
With the Internet of Things (IoT) and Industry 4.0, the industrial environment is changing constantly towards energy efficiency, power miniaturization and system reliability. Companies and hardware engineers need to adapt and develop their designs, |
|
Nordic Semiconductor nRF54L15 Development Kit
The nRF54L15 DK (Development Kit) features the nRF54L15 wireless SoC (System-on-Chip) and can emulate the nRF54L10, and nRF54L05 wireless SoCs. The affordable DK makes all features available to the developer on a single board. The nRF54L15 DK is ful |
|
Microchip MIC2133
The MIC2133 is a constant on-time, dual phase synchronous buck controller featuring a unique adaptive ON-time control architecture with Hyperlight Load® and phase shedding features. The MIC2133 operates over an input supply range from 4.5V to 75V and |
|
Microchip PAC1954
The PAC1954 is a quad power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible t |
|
Renesas RA8E1 MCU
The RA8E1 MCU Group features entry-line 32-bit microcontrollers (MCU) based on the Arm® Cortex®-M85 (CM85) core with Helium and TrustZone®, delivering breakthrough performance of 6.39 CoreMarks/MHz, with fully deterministic, low-latency, real-time op |
|
onsemi Image Sensing Technologies
As a leader of intelligent sensing technology, onsemi develops innovative solutions with customers and specific applications in mind. Leveraging its deep technical expertise, onsemi's sensing products are designed to solve application-focused challen |
|
Microchip WILCS02
The WILCS02 Wi-Fi Link Controller SD Board makes it easy to connect to the cloud using a host MPU running Linux®. This SD board features the WILCS02PE, an IEEE® 802.11 b/g/n (2.4 GHz) IoT link controller module. The WILCS02 SD Board offers: A good |
|
Microchip WINCS02
The WINCS02 Add-on Board is an efficient low-cost development platform to evaluate and demonstrate the features, capabilities and interfaces of Microchip's Wi-Fi4 (single band) network controller module, WINCS02PC. This add-on board is compliant to t |
|
Microchip RNWF02
The RNWF02 Add-on Board is an efficient low-cost development platform to evaluate and demonstrate the features, capabilities and interfaces of Microchip's Wi-Fi4 (2.4 GHz) module, RNWF02PC. This add-on board is compliant to the mikroBUS standard and |
|
onsemi AR0823AT Image Sensors
The onsemi AR0823AT is a 1/1.8-inch CMOS digital image sensor with a 3840 H x 2160 V active−pixel array. This advanced automotive sensor captures images in high dynamic range (HDR) with LED flicker mitigation (LFM). The AR0823AT is able to capture bo |
|
Nexperia Transformer drivers
Nexperia’s push-pull transformer drivers are designed to drive small-form-factor center-tapped transformers and offer a low-noise, low electromagnetic (EMI), and high efficiency solution for providing isolated power for signal isolators and isolated |
|
STMicroelectronics L4978
The L4978 is a step down monolithic power switching regulator delivering 2A at a voltage between 3.3V and 50V (selected by a simple external divider). Realized in BCD mixed technology, the device uses an internal power D-MOS transistor (with a typica |
|
STMicroelectronics L4973
The L4973 is a step down monolithic power switching regulator delivering 3.5A at fixed voltages of 3.3V or 5.1V and using a simple external divider output adjustable voltage up to 50V. Realized in BCD mixed technology, the device uses an internal pow |
|
STMicroelectronics A7985A
The A7985A is a step-down switching regulator with a 2.5 A (minimum) current limited embedded power MOSFET, so it is able to deliver up to 2 A current to the load depending on the application conditions. The input voltage can range from 4.5 V to 38 |
|
STMicroelectronics L4971
The L4971 is a step down monolithic power switching regulator delivering 1.5A at a voltage between 3.3V and 50V (selected by a simple external divider). Realized in BCD mixed technology, the device uses an internal power D-MOS transistor (with a typi |
|
STMicroelectronics A7986A
The A7986A is a step-down switching regulator with a 3.7 A (min.) current limited embedded power MOSFET, so it is able to deliver up to 3 A current to the load depending on the application conditions. The input voltage can range from 4.5 V to 38 V, |
|
STMicroelectronics L4976
The L4976 is a step down monolithic power switching regulator delivering 1A at a voltage between 3.3V and 50V (selected by a simple external divider). Realized in BCD mixed technology, the device uses an internal power D-MOS transistor (with a typica |
|
STMicroelectronics A6986
The A6986 automotive grade device is a step-down monolithic switching regulator able to deliver up to 2 A DC. The output voltage adjustability ranges from 0.85 V to VIN. The 100% duty cycle capability to withstand the cold crank event and the wide in |
|
STMicroelectronics A6986F
The A6986F automotive grade device is a step-down monolithic switching regulator able to deliver up to 1.5 A DC. The output voltage adjustability ranges from 0.85 V to VIN. The 100% duty cycle capability and the wide input voltage range meet the cold |
|
STMicroelectronics L5983
The L5983 is a step-down switching regulator with a 2.0 A (min.) current limited embedded Power MOSFET, so it is able to deliver an output current in excess of 1.5 A DC to the load. The input voltage can range from 2.9 V to 18 V, while the output vo |
|
STMicroelectronics STPD01
The STPD01 is a programmable synchronous buck converter suitable to provide power supply in applications following USB power delivery specifications. The device provides those voltages required by USB power delivery systems as stated in USB PD 3.0 s |
|
STMicroelectronics A5975D
The A5975D is a step-down monolithic power switching regulator with a minimum switch current limit of 3.75 A, it is therefore able to deliver up to 3 A DC current to the load depending on the application conditions. The output voltage can be set from |
|
STMicroelectronics L5981
The L5981 is a step-down switching regulator with a 1.5 A (min.) current limited embedded Power MOSFET, so it is able to deliver in excess of 1 A DC current to the load depending on the application condition. The input voltage can range from 2.9 V t |
|
STMicroelectronics L7980
The L7980 device is a step-down switching regulator with a 2.5 A (minimum) current limited embedded Power MOSFET, so it is able to deliver up to 2 A current to the load depending on the application conditions. The input voltage can range from 4.5 V |
|
STMicroelectronics L6986H
The L6986H is a step-down monolithic switching regulator able to deliver up to 2 A DC. The output voltage adjustability ranges from 0.85 V to VIN. Thanks to the P-channel MOSFET high-side power element, the device features 100% duty cycle operation. |
|
STMicroelectronics L7986TA
The L7986TA is a step-down switching regulator with 3.7 A (min.) current limited embedded Power MOSFET, so it is able to deliver up to 3 A current to the load depending on the application conditions. The input voltage can range from 4.5 V to 38 V, w |
|
STMicroelectronics A5972D
The A5972D is a step-down monolithic power switching regulator with a minimum switch current limit of 1.8 A so it is able to deliver up to 1.5 A DC current to the load depending on the application conditions. The output voltage can be set from 1.235 |
|
STMicroelectronics ST1S41
The ST1S41 is an internally compensated 850 kHz fixed-frequency PWM synchronous step-down regulator. The ST1S41 operates from 4.0 V to 18 V input, while it regulates an output voltage as low as 0.8 V and up to VIN. The ST1S41 integrates 95 mΩ high-s |
|
STMicroelectronics ST1S14
The ST1S14 is a step-down monolithic power switching regulator able to deliver up to 3 A DC current to the load depending on the application conditions. The high current level is also achieved thanks to a HSOP8 package with exposed frame, that allows |